CAUTION:
- USE THIS TOOL AT YOUR OWN RISK!!
- Overclocking your cpu may damage your device.
- Before autostarting the app be sure that your device will not hang.
- Backup is always recommended!!

Usage:
- Download and install the CAB.
- Start WiMoSpeed.exe. If it reports that it cannot identify your ROM: read LIMITATIONS/PROBLEMS.
- Select Speed.
- Set Speed.
- Exit WiMoSpeed.exe.
- Your device still runs with speed you set.

Auto start WiMoSpeed to desired speed:
Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.
1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
3. Copy that lnk file to the "/Windows/Start Up" folder.
4. Reboot device.
5. Run WiMoSpeed to verify "current CPU speed" is correct.

Limitations:
WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of:
- Rhodium.
- RhodiumW.
- Topaz.
- Blackstone.
- Whitestone / Imagio.
- Raphael / Fuze.
- Diamond.
- Kovsky / Xperia.
- Quartz.
- Pure.

Technique:
Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.

Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.

Update Description:
v1.08:
- Added support for more OEMXIPs (1 x Diamond, 1 x Blackstone).
- Added support for more RADIOs (0.93.25.NS16, 1.02.25.32, 1.10.25.18, 1.11.25.71, 1.11.25.76).

v1.07:
- Set os-versions in CAB-Information-File, maybe it solves installation problems.
- Added support for more OEMXIPs (1 x Topaz, 1 x Blackstone).
- Added support for more RADIOs (1.02.25.28).

v1.06:
- Checks ROM-identification at startup.
- Support for Pure.
- Added support for more OEMXIPs.
- Added support for more RADIOs.

v1.05:
- Support for Quartz.
- Added support for more OEMXIPs.
- Added support for more RADIOs.

v1.04:
- Blackstone problem should be solved now (tested by tsalta with Blac016 / 1.17.25.09).
- Added support for more ROMs.
- Support for Raphael / Fuze, Diamond, Kovsky / Xperia.
- GUI shows ROM identification.

v1.03:
- Blackstone problem (speed cut in half after sleep) should be solved.
- Added support for more ROMs.
- Changes in GUI (you have to create your links again; old ones starts the GUI only).

v1.02:
- Added support for more devices.
- Added support for more ROMs.

v1.01:
- Added support for more OS-ROMs.
- Added support for more radio-ROM.
- New function: restore default speed (528 MHz).

v1.00:
- Initial release.
- Rhodium, RhodiumW.